The IT-9000 is equipped with an imager (CMOS Camera). You will find an overview with all readable codes in the Software Manual for IT-9000 series.
Image Scanner Demo
You will find a demo program for simple tests and presentations under START, PROGRAMS, UTILITY. Under Windows Mobile it is located directly in the Programs folder. The imager can read 1D and 2D barcodes.
In the same menu as the demo program you can find the program Image Scanner Read. This scanner wedge is running invisibly in the background and puts the collected to the respectively actual cursor position. If this wedge is used a complex own development can become unnecessary.
Extensive settings for the imager can be done under START, SETTINGS, CONTROL PANEL (Windows Embedded CE) or under START, SETTINGS, SYSTEM (Windows Mobile), respectively. The settings will be saved permanently in a configuration file.
The settings are only valid for the imager wedge and own programs. The Image Scanner Demo (see above) does always run with the default setting.
Enhanced Laser and Imager Scanner Application
As an enhancement to the integrated Imager / Laser Scanner Wedge Application, an Enhanced Laser and Imager Scanner Application ("ELISA") is available with enhanced features such as Bulk Scanning, Aimer Mode, Barcode Filter, Counter Window etc.
The Scanner-Wedge can only be used when the symbol for the scanner is displayed in the status bar.
The scanner only processes codes that have been activated with the matching settings.
Please pay attention to the correct reading distance from the scanner to the label.
Damaged labels cannot be processed by the scanner.
How can I configure the imager for the Remote Desktop Connection (RDP)?
Under Windows Embedded CE you can make the settings for the scanner at START, SETTINGS, CONTROL PANEL, "Imager Setting". Under Windows Mobile you will find the settings at START, SETTINGS, SYSTEM. Go to the tab "IMGRead", and select "Key Event". In the field beneath "Add Suffix" specify whether you need an additional termination code, e.g. the tabulator, or not. Confirm your settings with OK. Once you have finished making your settings, launch the imager wedge again at Start, Programs, Utility, "Image Scanner Read".
For Windows Embedded CE, an additional step is required: Last but not least configure the Remote Desktop Client software. Set "Apply Windows key combinations" to "On the local computer”. You can find the settings window for key combinations in the dialog box of the RDP client. For further details refer to the Software Manual.
If you find it difficult to edit RDP settings on your mobile device with Windows Embedded CE, you can also modify the configuration file on your PC and copy it afterwards to your mobile device again. Please find below a sample configuration.